ST Racing Concepts MIP C-CVD

for TRAXXAS SLASH Review


Publication: Big Squid, Online RC Magazine

Date: April 2009 - Blog, For Bashers, by Bashers


MIP BALL DIFF KIT for TRAXXAS SLASH

From: ST Racing Concepts - MIP CVD’s for the Traxxas Slash
Retail Price- $42.00
Part Number- ST1953
URL -
www.TeamSTRC.com Direct Link

Review By: Tim Mohr


Features:
Beefy design for greater power handling
Increased traction
Reduced binding

Why you need this product:
While the stock Traxxas “slider” drive shafts work ok, they fall short when used on mod type power, or on bumpy tracks. The stockers can twist, break, and the stock outdrives are known for breakage during high power applications. The stock sliders are also prone to not “sliding” very smoothly, resulting in rough/bound-up suspension travel. The ST Racing Concepts MIP CVD’s solve all these problems. The CVD’s come with sturdy metal outdrives, beefing up that portion of the drive line, and of course their drive shaft set-up is second to none in quality and durability.

Build/Use Notes:
The stock Traxxas Slash axle shims caused binding when used in combination with the CVD’s. I was able to dig up four (two for each axle) MIP metal axle shims in my toolbox from a previous CVD kit. Once these were installed (one on each side of the rear hub bearings) all binding was gone. Also, I use the very trick
ST Racing Concepts aluminum rear wheel hexes on my Slash. The supplied CVD drive pins are too thick to properly fit in these hexes, so I ditched the MIP drive pins and used the stock Traxxas pins which slipped right in. Lastly, on every CVD I’ve ever assembled, black grease is used in the drive cup area to eliminate friction, and thread lock is used on the grub screws. Neither the grease nor thread lock was supplied with the CVD’s. Most avid rc’ers will have these in their pit boxes, but don’t overlook the use of these just because they were not supplied.

Durability:
The ST Racing Concepts MIP CVD’s are constructed from quality material, and a lot of it. These CVD’s look capable of handling loads of power, and I didn’t come close to breaking them while testing, even on 4S Li-po and brushless power. Outdrive wear can be an issue with some CVD’s, but none was found, even after a half dozen packs on 3S Li-po and a VERY fast Castle Creations motor.

Highs: Extremely tough design. Look very pro moto. Essential for high power use. Eliminates the binding of the stock “slider” shafts for superior suspension action.

Lows: CVD’s should come with extra shims, grease, and thread locking compound.

For more information on these and more for your Slash, please visit www.TeamSTRC.com

Tim Mohr

As with all our stuff, if you see me at a bash or at the track, feel free to stop by, say hi and check out the stuff! I’ll give ya some stickers, and even let ya try stuff! (maybe… if you ask nice)


SUMMARY


Time To Bash - 9.0/10 - The CVD themselves are extremely easy to build, but getting the stock outdrives off might take you a few minutes. I spent about 30 minutes installing the CVD’s, which is very reasonable considering I was taking pictures, writing down notes etc..


Workability - 7.0/10 - Well thought out, well written instructions that make installation simple, but CVD’s should have come with extra shims, grease, and thread locking compound.


Car Show Rating - 7.0/10 - These CVD’s look much different than the stocker drive shafts- they look like they really mean business, and look much higher tech than the stock plastic garb. No, they aren’t all bling’ed out in chrome or gold plating, they are more the high tech racer look. Don’t expect to win car shows with these, expect to win races.


Bash-A-Bility - 10/10 - Absolutely zero breakage or even signs of wear, even after extreme abuse.


Big Squid Rating - 8.0/10 - Tentacles.. Very pro moto, bombproof, and a Huge improvement over stock.



www.MIPonline.com


 

CNC Turning, CNC Milling, Micro Machining, Miniatures, CNC Swiss Screw Machining, Engineering High Volume & Tight Tolerances, Precision Commercial Manufacturing in Southern California, USA.

MBE  WBE  SBE

...Pros know & trust MIP racing performance!  The #1 comp level aftermarket radio control car accessory manufacturer in the world, we design the highest quality RC car parts and R/C truck parts as stock replacements for the most serious hobbyists.  Precision race-tested, our expert CNC machining is still in-house in the USA!

...Tools unmatched in quality!  Our hardened-steel MIP Thorp hex wrenches and power driver inserts are legendary for building model cars, helicopters, i-Sobots, jewelry, and more. Every MIP product is extensively tested by industry professionals for top performance! 

...How good is MIP? Ask around! Winners know MIP CVD™s are standard in Team Associated, HPI, Corally, and Losi pro kits.  Upgrade to MIP stock replacements for your Electric and Nitro Racing –Touring, On-Road, or Off-Road!  MIP Hop-Ups fit Team Losi, Team Associated, Traxxas (Slash, T-Maxx, and more), Kyosho, Thunder Tiger, X-Factory, Jammin, J Concepts, HPI Hot Bodies, Tamiya, Axial, and many more..

....Leading the Model RC Cars & Trucks Hobby Industry since 1979!

Moore’e Ideal Products LLC

830 W Golden Grove Wy

Covina CA 91722 USA

001-626-339-9007

MAKING FAST TOYS FASTER

RC CAR HOPUPS & TOOLS

MADE IN THE USA

SINCE 1979

Copyright ©1979-2013 Moore’s Ideal Products, LLC • All Rights Reserved • Terms & Privacy Policy

ABOUT

PRODUCTS

SUPPORT

FACEBOOK

Tech Community