#15040 MIP Pucks™, 17.5 Bi-Metal R-CVD™ Drive System, AE T5M
The next generation stadium truck is here, the Associated T5M and so comes the ultimate drivetrain system, MIP’s Bi-Metal R-CVD™’s. With a rock solid design proven by the B5M this New MIP Pucks™ system is perfect for all T5M owners looking for an edge in the stock spec classes. This design is unlike C-CVD’s™ as it features a keyed joint made out of hardened alloy steel that connects to 7075 hard anodized aluminum. This feature allows you to lighten up the drivetrain without sacrificing the durability that steel components offer. Also with this R-CVD™ design it couples your original axle components with the MIP Bi-Metal bone to keep costs low and give you the essentials to transfer over to MIP’s Pucks™ system! Of course the system is accompanied by 7075 hard anodized aluminum outdrives and the necessary components to build your aluminum puck™ diff. Get what your RC stock vehicle needs to keep up with the competition, MIP Bi-Metal R-CVD™’s! 100% Made in the USA!
AE T5M Stock Racers
40% Lighter than OEM
Lower maintenance costs
Higher quality materials used
R-CVD™ Keyed Design
7075 Hard Anodized Aluminum
Hardened Alloy Steel
USA Grade Materials
100% Made in the USA!
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction sheet (1), MIP Lube & Thread Gel Cup (1), Diff Lube & Grease Cup (1), 1/4x9/32” Diff Spring (1), 2-56x.925 Diff Screw Shoulder (1), MIP T-Nut (1), MIP Diff Thrust Cover (1), Washer Diff Rings (2), 3/32” Chrome Steel Ball Bearings (14), 1/16” Chrome Steel Ball Bearing (7), #2 Hardened Washer (1), MIP Thrust Retainer (1), MIP Pucks™ Male Outdrive AE B5/B5M (1), MIP Pucks™ Female Outdrive AE B5/B5M (1), BHCS 1-72x1/8 Button Head (6), SHCS 1/72x.250 Cap Screw (3), MIP CVD™ Puck™ Pin (2), MIP Outdrive Puck™ (8), MIP Bi-Metal R-CVD™ Yoke AE B5/B5M (2), MIP Bi-Metal R-CVD™ Bone AE T5M (2)
.050 inch Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)
1/16 inch Allen Key – (Suggest #9001 MIP Hex Driver Wrench 1/16 inch)
2.0mm Allen Key - (Suggest #9008 MIP Hex Driver Wrench 2.0mm)
¼ inch Sanding Drum and Dremel – Small modification needed for MIP Keyed R-CVD’s to clear cross member on T5M Arms.
Team Associated RC10T5M Team Kit (#70001), Modification needed to fit arms (look at requires section).
Special Note: Will not work with Factory Team Arm Mount, Part # 91608 +4mm C, B
#9135 MIP Ball Diff Screw, AE SC10, T4, B4 MSRP: $4.00 UPC: 691545091358
#9148 HW-SPRING/ Ball Diff, AE SC10 (1) MSRP: $1.50 UPC: 691545091488
#9151 MIP Ball Diff Thrust Washers, 1/4in x 3/32in AE SC10, T4, B4 (2) MSRP: $2.00 UPC: 691545091518
#9152 HW-WASHER/ Diff Ring, AE SC10, B4, T4, GT (2) MSRP: $2.50 UPC: 691545091525
#13131 MIP Pucks™, Orange No.1 Pucks™ (8) MSRP: $6.00 UPC: 691545131313
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00 UPC: 691545131320
#14232 MIP Pucks™, Bi-Metal Hub, AE B5/B5M (2) MSRP: $20.00 UPC: 691545142326
#14233 MIP Pucks™, Aluminum Male Outdrive, AE B5/B5M (1) MSRP: $15.00 UPC: 691545142333
#14234 MIP Pucks™, Aluminum Female Outdrive, AE B5/B5M (1) MSRP: $15.00 UPC: 691545142340
#14235 MIP Pucks™, Bi-Metal Thrust Rebuild Kit, AE B5/B5M MSRP: $12.00 UPC: 691545142357
#15041 MIP Pucks™, 17.5 Bi-Metal R-CVD™ Bone, AE T5M (2) MSRP: $20.00 UPC: 6915451504013
#99002 HW-Bearing, 1/16 Chrome Steel Ball (8) MSRP: $3.00 UPC: 691545990026
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00 UPC: 691545990262
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50 UPC: 691545990644
#99078 HW-SHCS, 1-72 x 1/4" Cap Head Screw (6) MSRP: $3.00 UPC: 691545990781
Safety Data at http://miponline.com/store/msds.html
Hi Res Images at http://www.miponline.com/store/media/myparts/ or click any image herein.
*Not Responsible for typographical errors
MIP Pucks™, 17.5 Bi Metal R-CVD™ Drive System, AE T5M, SC5M #15040 *Discontinued*1
Write a review | Read all reviews
Featured positive reviews:
MIP Pucks™, 17.5 Bi Metal R-CVD™ Drive System, AE T5M, SC5M #15040 *Discontinued*
The Best System for Stock Racing 03/14/2016
These MIP pucks really make a huge difference in performance. The extremely light weight alloy reduces the rotation mass and allows for quicker acceleration and punch out power. The replaceable pucks really keep my SC5M feel new. This product does not disappoint!
Your MIP Race Bag
Add These Related Products!