What is the motor limit when using the 4-10 Legend?

• 3.5 Turn or 9000 Kv MAX

What are some major differences between the old 4-10 and the new one?

• The new 4-10 is a 21st century redesign featuring improved fitment and precision machining to meet today’s standards and the demands of our customers. This continues MIP’s tradition of quality manufacturing for over 40 years.

What car kits does this kit fit?

• This kit is designed to fit the Team Associated RC10 Team Kit with the Stealth three-gear transmission.

Can I get replacement parts forever, or is this just a limited run with no more parts available?

• MIP is committed to manufacturing replacement parts for the 4-10 for the long term, allowing customers to enjoy and drive this car for as long as they remain involved in the hobby.

What tires do we need for the front?

• Standard 1/10 scale buggy front tires are the perfect fit.

Can this kit work with the large 3.5mm turnbuckle ball cups?

• Yes, this kit will work with the large 3.5mm turnbuckle ball cups. We recommend using the standard small ball cups on the steering linkage to provide clearance for the 4WD front wheels.

Can I install the MIP 4-10 kit on a graphite chassis?

• No.

Can I race the MIP 4-10 kit for modified racing?

• Yes.

Can I use the MIP 4-10 kit for an RC10T?

• No.

Can I use the MIP transmission?

• No.

Can I lock the MIP 4-10 slipper?

• No.

What tires can I use?

• 2.0 only.

Do I need chassis braces?

• No.

2 - MIP Front Wheel Ring, 4-10 Legend

1 - MIP Drill Guide

2 - MIP Front Wheel, 4-10 Legend

1 - Suport Hardware

1 - MIP Bearing Tensioner

1 - 4-40 x 5/16" BHCS

2 - 3/16" x 5/16" Bearing

2 - MIP Front Bearing Crush Spacer

4 - .200 x .281 x .010 Washer

4 - MIP Kingpin, 4-10 Legend

2 - .078 x .315 Roll Pin

4 - 4-40 x 3/32" Set Screw

1 - MIP CVD Bone Right, 4-10 Legend

1 - MIP CVD Bone Left, 4-10 Legend

2 - MIP Front CVD Axle

1 - MIP liquid Thread Lock

1 - MIP Grease

2 - 4-40 x 3/32" Set Screw

2 - .062 x .430 CVD Cross Pin

2 - MIP 8-32 Locknut

2 - MIP 3/16" Coupling

1 - MIP Drive Belt, 4-10 Legend

2 - 4-40 x 5/8" BHCS

2 - MIP Nose Brace Tube Spacers

2 - 4-40 x .250 BHCS

2 - No. 4 Washer

1 - MIP Outer Slipper Plate, 4-10 Legend

1 - MIP Inner Slipper Plate, 4-10 Legend

1 -  MIP Front Pulley

1 - MIP Inner Slipper Pad, 4-10 Legend

1 - MIP Outer Slipper Pad, 4-10 Legend

1 - 4-40 Alum. Locknut Thin

1 - MIP Slipper Spring, 4-10 Legend

1 - MIP Front Lower Gear

1 - MIP Front Topshaft

1 - MIP Left Drive Cup

1 - MIP Right Drive Cup

2 - MIP DDS Housing

4 - 3/16" x 5/16 Bearing

2 - 4-40 x .500 SHCS

2 - 3/16" Retaining Ring

8 - 3/32" x 3/16" Dowell Pin

2 - 6-32 x .750 FHCS

2 - MIP Steering Post

2 - Aluminum Locknut

4 - 3/16 x 5/16" Bearing

1 - MIP 4-40 x .350

1 - MIP Rear Idler Gear 

1 - MIP Rear Idler Shaft

1 - MIP Rear Idler Pulley

1 - MIP Bearing Tensioner Tube

2 - 3/16" x 5/16" bearing

1 - 4-40 x 5/16" BHCS

1 - Front Transmission Cases Tree w/ Belt Guide