Customer Service/Tech Help
Create an MIP Account
Hex Drivers Metric / SAE
Nut Drivers Metric / SAE
Speed Tips™ Metric / SAE
TLR / LOSI
Pit Box Supplies
MIP Cross Reference Chart
> #18390 - MIP X-Duty, CVD Kit, Traxxas Bandit
MIP X-Duty™, CVD Kit, Traxxas Bandit #18390
#18390 - MIP X-Duty, CVD Kit, Traxxas Bandit
Put me on the Waiting List
Add to Cart
Write a Review
Email a friend
MIP X-Duty™, CVD Kit, Traxxas Bandit
For ultimate efficiency use with ball bearing Traxxas Rear Hubs. (TRA3752, TRA5116)
Strong splined X-Duty™ steel construction.
Strong 12mm Keyed Hex Standard (Must use 12mm wheels not compatible with pin)
Fully rebuildable so any damaged or worn part can be replaced. (scroll down on main part # and all rebuild components are there)
Ultimate upgrade for those that are drag racing!
No more ripped and twisted drivetrain.
When hubs are in the lowest position, clearance on the arm may be necessary for the X-Duty™ Bell to rotate freely. Best to use a sanding drum to clearance the plastic arm. (check out photo with wrench pointing to area)
Use MIP Grease and Loctite upon assembly.
Be sure to keep joints lubed to enjoy long part life
Front Traxxas 12mm Hex Conversion : 1 x TRA1654
Upgrade Hubs and Bearings recommended : TRA3752 , TRA5116
Heat Treated steel components to help increase strength and part life.
Black Oxide coated to protect the components from premature rust.
100% Designed / Manufactured / Packaged in the USA!!!
Complete Rear X-Duty™ Drivetrain
World Class Products, Precision Tools, Race Proven Performance, Thats MIP!
Did you find this helpful?
1 - MIP Inst. Sheet, 18390 Traxxas Bandit
1 - MIP Thread Gel Safety Sheet
1 - MIP Support Parts Insert Sheet
1 - MIP Lube & Thread Gel Cup
2 - MIP Confetti Sticker
2 - CVD Axles/Traxxas Slash Duty Rear
2 - MIP X-Duty™ Female Bone, 40mm
2 - MIP X-Duty, Drive Hub, 13mm w/ 5mm Bore
2 - MIP X-Duty Male Bone, 42mm
2 - shss/ M3 x 4mm Flat Point
2 - Hex Adapter Traxxas X-Duty CVD Kit
4 - MIP M4 Pin Screw Slash Diff
4 - MIP Bearing Spacer, Rear, Traxxas Slash/ Slash 4x4
2 - spacer/ HPI Blitz ft. bearing spacer
5 - MIP 1/4" CVD Coupling
5 - Ø.092 x .625 Cross Pin w/ flat
5 - shss/ 8-32 x 1/8 flat point
2 - nut/ m4x.7 steel nyloc
#12140 - MIP 12mm Hex Adapter Keyed, X-Duty CVD™ Traxxas (2)
#18100 - MIP X-Duty Ball Joint Rebuild Kit (4)
#18101 - MIP X-Duty™, Female Bone, 40mm (1)
#18102 - MIP X-Duty™, Male Bone, 42mm (1)
#18111 - MIP X-Duty™, Drive Hub, 13mm x 5mm (1)
#18141 - MIP X-DUTY™, Rear CVD Axle 1/10 Scale Traxxas (2WD / 4WD)
Out of Stock, Back Order.
#99060 - Drive Hub Pin Screw M4 x .099 Pin Screw (4)
Recently Viewed Items
Browse Similar Items
Traxxas 1/10 Bandit